FT-110-173931-C_FT-110-173932-C_FT-110-173933-C流量傳感器GEMS
Gems hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Unlike timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor's standard power and output specifications make it easy to retrofit to existing controllers.
Low Cost Plus High Accuracy ±3% of Reading
Measures Low Liquid Flow Rates of 0.13 to 9.2 GPM (0.5 to 35 LPM)
Lightweight Plastic Design Enables Mounting in any Position
O-ring Design for Manifold Mounting
Specifications
Wetted Materials
?Body Nylon 12
?Turbine Nylon 12 Composite
?Bearings PTFE/15% Graphite
Operating Pressure 200 PSIG (13.7 bar)
Burst Pressure 2500 PSIG (172 bar)
Operating Temperature -4°F to 212°F (-20°C to 100°C)
Viscosity 32 to 81 SSU (.8 to 16 Centistokes)
Filter <50 Microns
Input Power 5 to 24 VDC @ 8mA
Output (Hz) NPN Sinking Open Collector @ 20mA Maximum
?Leakage Current 10μA (Pull-Up Resistor Required)
Accuracy ±3% of Reading
Repeatability 0.5% of Full Scale
Electrical Connection DIN 9.4mm Spacing*
?24 AWG 3 ft. Cable
Inlet/Outlet Ports 3/8? NPT Male
?G3/8 Male
?17mm Tube O-Ring
